Cost guide · Seattle & King County
Seattle MasterFix project ranges for Seattle and King County, WA, shown next to cited public market benchmarks. Every job is priced as one written project estimate for the agreed scope after a free on-site visit.
MasterFix ranges
Typical Seattle MasterFix project ranges, final price after free on-site estimate
Typical Seattle MasterFix project ranges, final price after free on-site estimate
| Band | MasterFix | Notes |
|---|---|---|
| Starting at | $19/per linear foot | Entry scopes |
| Typical | $30/per linear foot | Most common mid scopes |
| High planning | $61/per linear foot | Complex or premium scopes |
Cedar privacy on accessible lots often near typical; slopes and gates push higher.
Public 2025–26 estimates from cited sources — shown for comparison, not as a MasterFix quote. Sources are linked below. Washington sales tax may apply on a signed contract.
| Band | Market | What it represents |
|---|---|---|
| Low | $24/per linear foot | Angi Seattle low $/lf (material-dependent) |
| Typical | $40/per linear foot | Angi Seattle average about $40/lf |
| High | $85/per linear foot | Premium clear cedar / complex sites |
Angi Seattle fence guide: about $24–$56/lf depending on material, average near $40/lf.
How we work
Yes — /services/fencing/
Seattle MasterFix Precision Craftsmanship (Seattle MasterFix Precision Craftsmanship) is a Washington-registered contractor #SEATTMP744NL, based at 5415 6th Ave NW, Seattle, WA 98107. Service area: Seattle and King County, WA. Related pages: /services/fencing/.
FAQ
Typical Seattle MasterFix project ranges, final price after free on-site estimate: starting about $19 / per linear foot, typical about $30 / per linear foot, high planning band about $61 / per linear foot. Public Seattle market midpoint used for comparison is about $40 / per linear foot. Cedar privacy on accessible lots often near typical; slopes and gates push higher. Final price is after a free on-site estimate.
Angi's Seattle fence guide (2026 data page) puts typical installed costs around $24–$56 per linear foot depending on material, with an average near $40/lf. A 150-ft project often lands roughly $3,500–$8,200 in that dataset.
SDCI Tip #312 covers decks, fences, and arbors. Height, location, and masonry rules matter — confirm current limits with SDCI before digging posts. Call 811 before you dig.
Cedar and composite are commonly recommended for wet PNW conditions. Grade, posts, and sealing drive longevity as much as the face boards.
Photos
Placeholder slots for project photos. No images are claimed here until real job photos are added.
Sources
Open sources used for the ranges on this page. Always verify current figures before you budget.
Estimates are non-binding until a written contract is signed. Compare two or three written bids on the same scope, and verify any contractor on WA L&I before you sign.
Call (206) 550-4576 or send an estimate request. We will walk the scope and write a project quote — never an hourly guess.
More guides: /guides/ · Related service
